2.8 Selecting The Station Operating Conditions
This section describes the settings and modes you can set on your telephone.
Silent
The Silent key lets you turn off the ringer at your station for the currently ringing call. The ringer will operate
normally during the next call.
To silence the ringer,
•
Press the Silent key (Accent key).
Do Not Disturb
When a telephone is in Do Not Disturb mode, the telephone icon has a slashed red circle over it.
To place your station in do not disturb,
•
From the Call task menu select Do Not Disturb.
—OR—
•
Double-click your station icon in the current calls window.
Mute*
Prevents the other party from hearing anything from your telephone. The status of the mute feature is shown at the
bottom on the screen.
To toggle the mute condition either on or off at your station,
•
Press the Mute key (F3 key) on the keyboard.
*If you are using Impact Call for PCIU, you must have a Mute button programmed on your telephone for this
feature to work.
Headset Operation*
The status line at the bottom of the screen details whether your station is in the Headset or Handset operating
mode.
To toggle between Headset and Handset operation at your station,
•
Press the Headset key (F4 key).
*If you are using Impact Call for PCIU, you must have a headset button programmed on your telephone for this
feature to work.
Volume Control
There are two ways to adjust the volume of handset, speaker, ringer, and music outputs for your station:
•
From the Programming menu select Volume.
—OR—
•
Press Alt-P then V.
Both actions open the Phone Volume dialog box. From this box, click on the slider bars and drag them to the
volume settings you want. Once you adjust the settings, click OK to accept them. If you change volume settings
while on a call, the settings will not take effect until the call is over.
Using Impact Call 2 – 7
Impact Call User’s Guide
GCA70–360
