Courtesy of Main Resource, Inc. Visit us at
www.MainResource.com
or call 800 362-6740 for all your
telecom needs.
Page 1 of 6
Comdial Digitech DSU Impact Telephones
Administrator’s Guide
Creating LCD Response Messages
Your system provides two messages that can be used to alert other system users of your station
status, “Back at…” and “Call at…”. You may add up to 8 customized messages. To store the LCD
messages:
1. Write your message on a piece of paper (each message can have up to 16 characters).
2. Use the letter table code to assign a number for each letter.
3. Write the numbers on a piece of paper.
4. Press INTERCOM
5. Dial “*#05”.
6. Dial a message location number (1-9 and 0).
7. Dial “#” to clear the current message in that location.
8. Enter the 2-digit codes you wrote down in step 3.
9. Dial “*” to save the message.
10. Repeat as needed.
11. Press SPEAKER to end.
When the messages are programmed, make a list of the stored messages and their location
numbers for each user on your system.
