IPC98
Network Camera Module
w/ remote snap shot
11
Chapter 5: Advanced Setting
This chapter explains the advanced setting about IPC98, include:
z
Admin - Administration setting
z
Network - Network setting
z
Server - Server setting
z
Trigger - Event trigger
z
Update - System update
Click the name in the title bar to enter.
5.1 Administration setting
This section is to configure IPC98’s name,
administrator’s name, password and General user’s
name, password.
Administrator can operate the all functions and
configurations supported by IPC98,
General user can only live view, can’t do settings at all.
This is to prevent from wrongly setting by other visitors
5.1.1 Camera Name
Configure IPC98’s name. When you have multi camera in the network, you use this name to identify
different camera.
5.1.2 General user
In case you allow other people to access your IPC98, you can provide the general user name and
password. Such that, the settings will not be changed accidentially.
Steps of configure General user’s name, password.
1. user name: type in this IPC98’s enter name
2. old password: please input old password
3. new password: please input new password
4. check the new password: input the new password again
5. click the “Submit” button, finish the configuration
5.1.3 Administrator
Steps of configure administrator’s name and password.
1. user name: type in this IPC98’s enter name
2 old password: please input old password
3. new password: please input new password
4. check the new password: input the new password again
5. click “ok” button, finish the configuration
5.2 Network setting
This page is used to modify IP camera’s network connection properties, which include:
IP Assignment
PPPOE setting
DNS Server setting
5.2.1 IP Assignment:
Methods of getting a IP include
using dynamic IP supported by ISP or fixed IP
supported by network administrator.
IP Assignment includes : Static ,DHCP, and PPPOE ,
DHCP and PPPOE are Dynamic IP.
If choose static, you have to input :
IP address : fixed IP supported by network
administrator.
Subnet address: preset 255.255.255.0
MAC address: media access control (set before
out of the factory)
Gateway: set as default gateway
Click the Submit to update the configuration
