INSTRUCTION MANUAL
RATED PARAMETERS
Voltage:230VAC
Frequency:50Hz
Power: 2100W
HOW TO USE
1. Make sure the power switch is in the “0” position. Insert the plug into outlet and turn on the power
switch after testing.
2. Set the switch position to “2” and “
Ⅲ
” to dry hair.
3. Set the switch position to “2” , “
Ⅲ
” or “1”, “
Ⅰ
”, “
Ⅱ
” to style a fashion.
4. Set the switch position to “0” , unplug the plug then. Perform the hair dryer cool for 10 to 15 minutes
before hanging it over the wall-mounted equipment.
Cool shot
:
With this swich it is possible to interrupt the heating process so that the air can be mixed according to
individual requirements.
USER MAINTENANCE INSTRUCTION
This hair dryer maintenance is free, no consumption or lubrication is needed. Keep this appliance clean
for proper operating. Never block or clog air intakes, otherwise overheated will be happen. The
appliance has no user serviceable parts, any other servicing should be performed by an authorized
service representative or a professional center. Never allow the supply cord to be twisted, pulled, bent,
or wrapped around the dryer. If the cord is twisted, to untwist the cord before use. When not in use, this
appliance should be stored in a safe, dry location, out of reach of children.
IMPORTANT SAFETY INSTRUCTIONS
When using electrical appliance, especially when children are present, basic safety precautions should
always be followed, including the following:
