11
ART . 20046501 - SIMPLEHOME FLUSH-MOUNTED MODULE WITH 5 DIGITAL INPUTS
(5I)
The module with 5 digital inputs allows the connection of up to 5 contacts (buttons, switches, diverters, inverters,
general sensors...) for controlling the outputs on the SimpleHome system module. The compact interface can be
installed in traditional "3-module" boxes (concealed behind the electromechanical modules in the civil series) or
in junction boxes. The module with 5 digital inputs is powered directly by the bus.
N.B. The module must be programmed via the BUS line, using the SimpleHome/RS232 interface (20022611) and
the SimpleProg programming software.
Technical characteristics
Power supply voltage
24 Vdc ± 5%
Absorption
min. 5 mA, max. 22 mA
Inputs
4+1, optically coupled digital type
Max. input cable length
25 m
Protection
against reverse polarity
Indications
1 indicator LED: when flashing, indicates data transmission via bus, when lit steadily indicates
lack of power supply negative or incorrect device connection
Terminals
removable for BUS connection
Positioning
in flush-mounted boxes
Applicable standards
electromagnetic compatibility: EN 50081-1 (interference emission)
and EN50082-2 (resistance to interference)
Approvals
CE
Operating temperature
0° to 50°C
Storage temperature
-10° to +70°C
Relative air humidity
5 to 95% with no condensation
Weight
24 g (not including packaging)
Dimensions
41x29x9 mm
green (bus)
red (+)
blue (-)
CONNECTION TERMINALS
Term.
Function
-
BUS power supply negative
+
BUS power 24 Vdc
D
Bus data line
I4
Input 4
I3
Input 3
I2
Input 2
I1
Input 1
IS
Multiple command (scenario)
V+
+24 Vdc support
Specifications are subject to change without notice.
