38
ART . 20004601 – MODULE WITH 3 INPUTS AND 3 OUTPUTS (3I3O)
SimpleHome module Art. 20004601 has 3 inputs (voltage-free contacts, E.G. buttons, sensors, etc...) and 3
outputs, 2 of which require connection of an external relay (E.G. Art. 20004603) while the other controls an on-
board 16A relay (this can be programmed as a NO. NC. output using suitable programming software).
Module Art. 20004601 allows flush mounting in residential series boxes or on DIN rails.
Technical characteristics
Power supply voltage
24 Vdc ± 5%
Absorption
MAX. 115 mA
Outputs
• 1 16A relay output (230 Vac), resistive loads
• 2 transistor o24 Vdc with output active, Max. 50 mA
Indications
• 1 LEDs (red) indicating relay active
• 1 LED (yellow) indicating bus status:
- when flashing, indicates data transmission over the bus, when lit
- steadily, indicates lack of power supply negative
or incorrect connection of the device
Positioning
On DIN rail or in flush-mounted boxes
Approvals
CE
Operating temperature
0° to 50°C
Storage temperature
-10° to +70°C
Relative air humidity
5 to 95% with no condensation
Weight
70 g (not including packaging)
Dimensions
58x53x18 mm (1 DIN module)
CONNECTION TERMINALS
Terminal
Function
-
BUS power supply negative
+
BUS power 24 Vdc
D
BUS data line
V-
Common for outputs O1 and O2
O1 / O2
Transistor outputs (+24 Vdc with output active)
O3 / C
On-board 16A relay output
V+
ref24 Vdc for inputs
V- / K
Leave shorted for input reference at +24 Vdc
I1
Input 1
I2
Input 2
IS
Scenario input