background image

 

11

ART . 20046501 - SIMPLEHOME FLUSH-MOUNTED MODULE WITH 5 DIGITAL INPUTS 

(5I)

The module with 5 digital inputs allows the connection of up to 5 contacts (buttons, switches, diverters, inverters, 

general sensors...) for controlling the outputs on the SimpleHome system module. The compact interface can be 

installed in traditional "3-module" boxes (concealed behind the electromechanical  modules in the civil series) or 

in junction boxes. The module with 5 digital inputs is powered directly by the bus.

N.B. The module must be programmed via the BUS line, using the SimpleHome/RS232 interface (20022611) and 

the SimpleProg programming software.

Technical characteristics

Power supply voltage

24 Vdc ± 5%

Absorption

min. 5 mA, max. 22 mA

Inputs

4+1,  optically coupled digital type

Max. input cable length

25 m

Protection

against reverse polarity

Indications

1 indicator LED: when flashing, indicates data transmission via bus, when lit steadily indicates 

lack of power supply negative or incorrect device connection

Terminals

removable for BUS connection

Positioning

in flush-mounted boxes

Applicable standards

electromagnetic compatibility: EN 50081-1 (interference emission) 

and EN50082-2 (resistance to interference)

Approvals

CE

Operating temperature

0° to 50°C

Storage temperature

-10° to +70°C

Relative air humidity

5 to 95% with no condensation

Weight

24 g (not including packaging)

Dimensions

41x29x9 mm

green (bus)

red (+)

blue (-)

CONNECTION TERMINALS

Term.

Function

-

BUS power supply negative

+

BUS power 24 Vdc

D

Bus data line

I4

Input 4

I3

Input 3

I2

Input 2

I1

Input 1

IS

Multiple command (scenario)

V+

+24 Vdc support

Specifications are subject to change without notice.

Summary of Contents for 20003150























































Reviews: