7
4.2
ESTABLISHING CONNECTIONS
In order to configure the AUDIO MODULE and to retrieve the web interface, a current browser and a
network connection to the device are required. If the device is in the condition on delivery, it can
be accessed at the above-mentioned IP address and the network settings must be adjusted to the
address range, where necessary. To do this, please follow the instructions provided in chapter
"Adjusting the network settings of your computer".
The AUDIO MODULE has the standard IP address
192.168.1.226
.
4.3
DISCOVERY TOOL
If you do not know the network settings of the device, the
DiscoveryTool can help you to find out with which IP address
the device is available. The "DiscoveryTool" software is
platform-independent and can be run on any operating
system. It can be found on Comelit website in the page of
module.
Double-click the program icon in order to start the software.
All devices available in the network are shown in the
program window with their respective device names and
serial numbers. An AUDIO MODULE can be recognised by
means of a serial number starting with "BT102…"!
The colour marking of the devices shown in the
DiscoveryTool has the following meaning:
§
Grey = Information is being retrieved
§
Green = Device is in the same network area as the PC
§
Yellow = Device is NOT in the same network area as the PC
Mark the required device in the list. The device information available is displayed in the fields
below. If the device is marked green, you can immediately call up the start page of the device by
pressing the "Open in Browser" button. If the device is marked yellow, change the network settings
of your PC correspondingly (see chapter below).
4.4
ADJUSTING THE NETWORK SETTINGS OF YOUR
COMPUTER
In order to adjust the network settings of your computer and establish a connection to the device,
please both devices has to be on the same network.
Example of a valid configuration for the factory settings of the AUDIOMODULE:
§
Free IP address:
192.168.1.228
§
Subnet mask:
255.255.255.0
The web interface of the AUDIOMODULE can be accessed by means of the browser. Restore the
original network settings of your PC by following the steps described above as soon as you have
configured the AUDIOMODULE correspondingly.
