EN
30
5.4 SELF ACTIVATION FUNCTION
5.3 PAGING CALL
5.3.1 How to initiate a paging call
Press to initiate the all-page chime
» After the chime sounds, a 30 seconds message can be
broadcast to all monitors on the system (maximum 4
monitors).
5.3.2 How to answer a paging call
Press to answer the paging call
» a (300 seconds) point to point conversation between the
two monitor is estabilished.
» the paging call will be terminated for the other devices.
√
Self activation is possible only when the system is in standby
Press the self activation button (
by default) to display on the
monitor the video from the external unit.
Press again to cycle through several cameras
If a call is underway with an external unit it is NOT possible
to cycle between the external units
5.4.1 How to display on the door entry monitor the
image transmitted from the CCTV camera
√
During “call in progress” or during Self activation.
Press the programmed button to display on the monitor the
image transmitted from the CCTV camera.
Press again to cycle through several cameras and come
back to the external unit
1
2
CCTV
CAMERA
cycle
CAMERA 1
CAMERA 2
CAMERA 3
MAIN
UNIT
A call from the external unit always takes priority over an intercom communication or a paging call
» the call in progress will be terminated for the other devices.
cycle
MAIN
UNIT
UNIT 1
UNIT 2
UNIT 3
MAIN
UNIT
MAIN
UNIT
UNIT
1
CAMERA
1
CCTV
CAMERA1
UNIT
2
CAMERA
2
cycle
cycle
UNIT
3
CAMERA
3
MAIN
EXTERNAL UNIT
MAIN
EXTERNAL UNIT
