NVR 2.0 User Manual (4
th
ed.)
66
Figure 11.21 Alarming Linkage Setting
(1) Linkage: select mail linkage, sound alarm, monitor alarm, upload center in four
ways; The following four ways:
a) Mail linkage: this method needs to set a valid mailbox in the Email parameter of the
device and fill in a valid mail sending and receiving server and port number. With this
condition, if the alarm is triggered, the mailbox will be received in real time alarm
information;
b) Audible alarm: check to indicate that the buzzer will sound when alarm occurs;
c) Monitor alarm: the alarm information will be displayed in the alarm information field
of the local device in real time.
d) Upload Center: The alarm information will be displayed in real time on the Web end
or platform alarm information bar of the device.
(2) Alarm output: When the alarm output is triggered by the device,
(3) Preview linkage: select one, several or all channel linkage in the preview
interface to open the preview linkage. If the alarm triggered, the selected channel screen
will automatically pop up;
(4) Recording linkage: select one, several or all selected channel linkage, alarm
triggered, the selected channel will be real-time video;
(5) Capture: select one, a few or all channel linkage. If alarm trigger, the selected
channel will be real-time capture;
(6) PTZ Linkage: PTZ equipment needs to be connected to the NVR. When the
alarm is triggered, the Preset point, Cruise (Tour) or Pattern alarm of the PTZ equipment
can be linked, click Cancel to cancel the PTZ linkage.
Set the linkage mode, click "OK" to save.
11.5 Smart Search
Intelligent retrieval includes face retrieval and vehicle retrieval, which are used to
