-
70
-
3.8.3
Hardware Settings
You can enable or disable the hardware functions of ND16000.
i.
Enable configuration reset switch
By enabling this option, you can press the reset button for 5 seconds to reset
the administrator password and system settings to default.
ii.
Enable hard disk standby mode
When this function is enabled, hard disk will go to standby mode if there is no
access within the specified period.
iii.
Enable light signal alert when the free size of SATA disk is less than the value:
The Status LED indicator will blink red and green when this function is enabled
and the free space of the SATA disk is less than the value. The range of the
value is 1-51200 MB.
iv.
Auto power on when power resumes after power loss
When this function is enabled, ND16000 will turn on automatically when
power resumes after improper shutdown or power loss.
Reset Button
Summary of Contents for ND16000 Series
