-
71
-
3.8.4
System Update
Note:
If the system is running properly, you do not need to update the
firmware.
Before updating system firmware, please make sure the product model and
firmware version are correct. Follow the steps below to update firmware:
Step 1:
Download the release notes of the same version as the firmware from
COMET LABS website
http://www.COMET LABS.com.tw/
. Read the release notes
carefully to make sure you need to upgrade the firmware.
Step 2:
Before upgrading system firmware, back up all disk data on the server to
avoid any potential data loss during system update.
Step 3:
Click the [Browse…] button to select the correct firmware image for
system update. Click
Update System
to update the firmware.
Note:
System update may take tens of seconds to several minutes to complete
depending on the network connection status. Please wait patiently. The system
will inform you when system update is completed.
Summary of Contents for ND16000 Series
