Comet Spa CRS 90 BT Manual Download

Page: 27 / 140

2. GENERAL INFORMATION

2.1 MANUAL PURPOSE

To make it easier to read about and look up various
subjects, refer to the table of contents at the begin-
ning of the section in your language.
This manual has been prepared by the manufacturer
and is an integral part of the product. As such, it must
be kept in a safe place for the machine’s entire service
life until demolition.
The customer must ensure that machine operators
have read or are familiar with the contents of this ma-
nual so that they strictly follow the instructions desc-
ribed herein.
Constant compliance with the instructions provided
in this manual is the only way to guarantee the best
results in terms of safety, performance, efficiency and
service life of the product you now own. Non-compli-
ance with these rules may cause injuries to people and
damage to the machine, the scrubbed surface and the
environment: in no case can such injuries or damage
be attributed to the manufacturer.
This manual refers in detail to the machine and provi-
des instructions and descriptions only about our bat-
teries and battery chargers (optional).
The batteries and the battery charger are basic comp-
lementary machine parts and will affect its operation
in terms of running time and performances. Only the
correct combination of the two accessories (batteries
and battery charger) will ensure the highest possible
performances and avoid wasting lots of money. For
more detailed information refer to the special battery
and battery charger manuals.
Our recommended battery chargers and batteries (op-
tional) ensure the best combination with the machine
and offer outstanding versatility (battery charger) as
well as the category’s highest quality and performance
standards.

2.2

TERMINOLOGY AND SYMBOL LEGEND

For the sake of clarity and to efficiently highlight the
various aspects of the instructions provided, terms
and symbols were used that are defined and illustra-
ted here below:

- Machine. This definition replaces the commercial name

to which this manual refers.

- Operator. ‘operator’ means the person or persons given

the task of installing, operating, adjusting, maintaining,

cleaning, repairing or transporting machinery.

- Technician. A technician is considered a person who

has the experience, technical education, legislative and

regulatory knowledge that allows him to carry out any

type of required work, and the ability to recognise and

to avoid possible risks during machine installation, and

maintenance.

☞

- INDICATION SYMBOL. Particularly important in-

formation to avoid machine malfunctions.

•

- ATTENTION SYMBOL. Very important informa-

tion to avoid serious damage to the machine and to
the environment in which it operates.

•

- DANGER SYMBOL. Vital information to avoid seri-

ous (or extreme) consequences affecting the health of
persons and causing damage to the product and the
environment in which it operates.

Total weight (ready to operate)

Max. working range incline 2%

(Max. transporting range incline 10%)

Rated power brush drive

Rated power suction turbine

2.3

PRODUCT IDENTIFICATION

The nameplate located under the dashboard contains
the information:

2.4

SPECIFIC USE

This appliance is suited for the commercial use, e.g. in
hotels, schools, hospitals, factories, shops, offices, and
rental companies.
This machine is a floor scrubber-drier: it must be used
to scrub and to vacuum liquids of flat, rigid, horizontal,
smooth or moderately rough and uniform floors that
are free from obstacles in both civic and industrial en-
vironments. Any other use is prohibited.
Please refer very carefully to the safety information
reported in this manual.
The scrubber-drier distributes a quantity of a water
and detergent solution (adjustable) on the surface to
be cleaned, while the brushes remove any dirt on the
ground. The machine’s suction system, using a ground
squeegee, perfectly dries the liquids and the dirt just
removed from the front brushes in a single pass.
By efficiently combining a cleaning detergent with va-
rious types of brushes (or abrasive disks), the machine
can adapt to all the various combinations of floors and
dirt.