Comet System S3120E, Instruction Manual

8 

  IE-LOG-S3120E-03 

•

insert new battery 

respecting the correct polarity

 (see s and – near battery holder). If 

you connect  new battery up to  30 s,  all logger settings  remain unchanged. In the opposite case 
check by means of PC program all settings, especially the real time clock in logger. 

Attention, 

inserted battery with incorrect polarity causes logger damage!

•

put the lid back again and screw four screws 

•

connect logger to the computer and 

write to it the information on battery replacement 

(menu 

Configuration/Battery  replacement).  This  step  is  necessary  to  evaluate  properly  the  remaining 
battery capacity 

Old battery or logger itself (after its life) is necessary to liquidate ecologically! 

End of operation 

Disconnect  the  device  and  dispose  it  according  to  current  legislation  for  dealing 

with electronic equipment (WEEE directive). Electronic devices must not be disposed of 
with your household waste and need to be professionally disposed. 

Instrument passed through tests of electromagnetic compatibility (EMC): 

Device conforms in accordance with EN 61326-1 these norms: 

radiation:  

EN 55011 Class B 

immunity:  

EN 61000-4-2 (levels 4/8 kV, Class A) 

EN 61000-4-3 (intensity of electric field 3 V/m, Class A) 

EN 61000-4-4 (levels 1/0.5 kV, Class A) 

EN 61000-4-6 (intensity of electric field 3 V/m, Class A) 

Technical support and service

Technical  support  and  service  is  provided  by  distributor.  Contact  is  included  in  warranty 

certificate. 

Appendix A - Accuracy of dew point measurement