10
IE-COM-C4141-13
This item indicates if audio signaling of alarm indication is switched on
(On) or switched off (OFF). Press ENTER key to change actual setting.
Notice: if the battery voltage is low, audio indication is out of operation to
reduce current consumption independently on this selection.
Clearing of minimum and maximum memory of all values. Memory is
cleared after pressing ENTER key. Clearing is confirmed by reading
YES on the LCD lower display.
Press ENTER key to display values stored in the HOLD memory. Press
DISPLAY key to display other stored values. Press ENTER key to leave
this mode.
Battery voltage of partially loaded battery is displayed. This value
illustrates battery condition.
This selection (by pressing ENTER key) enables to enter mode of
pressure correction to the sea level (see below)
Display refresh mode is indicated. In the FAST mode refreshment is
fastest with regular interval approximately 0.7 s. In the dynamic refresh
mode (DYN.) each 15 s refresh interval of display is doubled to
maximum 5 s if measured values are stable. If measured values change,
refresh interval decreases to approximately 0.7 s. This dynamic mode
prolongs battery life significantly. Select the desired mode by ENTER
key. Notice: if battery voltage is low, the FAST mode is out of operation
to reduce current consumption independently on this selection.
Each pressing of ENTER key causes displaying of service information
on software version (upper LCD line) together with instrument
configuration on the LCD lower line.
