14
IE-COM-D0221-05
Instrument offers the possibility to clearing the instrument memory
(ERAS). If you do not wish to clear the memory before new logging
start, confirm selection ERAS NO by pressing the ENTER key.
Now instrument displays adjusted storing interval. To modify the
storing interval use arrow keys. Interval 10 sec is displayed as
MIN
0:10
, minute intervals are displayed as
MIN x:00
and hour intervals
as
x:Ho
. Confirm adjusted interval by pressing ENTER key. Notice: if
manual logging mode is selected, this menu item is skipped (there is
no interval adjustment).
Logging is started and instrument returns to default mode displaying
actual values. Logging in progress is in default mode indicated with
reading LOG on display. If memory is filled over 90 %, symbol LOG
is blinking (only in automatic logging).
Logging start with clearing memory and logging mode
selection
It is possible to clear memory only if logging is stopped. Modification of logging mode is enabled
only after memory is cleared. Clearing of memory is optional part of the above procedure logging
START. Notice: there is no way to "undelete" the cleared data!
If it is needed to clear the memory before logging start, first it is
necessary to select menu item logging START (symbol Strt) and
confirm by pressing ENTER key.
Notice: if low battery voltage is indicated, it is not enabled to start
logging nor to clear the memory.
Now instrument offers possibility to clear the memory (ERAS). Default
is selection ERAS NO. If clearing of the memory is needed use the
arrow keys to select ERAS YES and confirm by pressing ENTER key.
