16
IE-COM-D0221-05
Connection of the device to a personal
computer
For connection of the instrument to a personal computer is designed the USB communication cable
(included in delivery). During time instrument is connected to the computer, there is a reading PC on
the LCD display and measurement nor logging is interrupted. Keyboard of the instrument is disabled
with the exception of ON/OFF key.
Result of reading data to the computer is a protocol of measurement including instrument serial
number and a table of logged values with date and time.
After disconnection of the communication cable reading PC disappears and instrument is in the
default mode as after switching on by the ON/OFF key. If logging was in progress before connection
to the computer, logging will continue with the same parameters after disconnection of the cable (if
new setting of logging was not performed during communication - including logging stop).
Attention! If you leave the USB cable connected and do not communicate with the device for
more than 5 minutes, the device will automatically switched OFF.
