46
IE-LGR-Uxxxx-16
Parameters of datalogger inputs
U0110
_________________________________________
Measured value:
Internal temperature
Temperature range:
(-30 to +70
) °C
Accuracy:
± 0.4 °C
Response time:
t
63
< 6 min, t
90
< 15 min (temperature step
20 °C, air
circulation approx. 1 m/s)
Display resolution:
0.1 °C
Recommended calibration interval:
2 years
U0111
_________________________________________
Measured values:
1x temperature sensed by an external COMET
Pt1000/E series probe
Temperature range:
(-
90 to +260) °C, Pt1000/3850 ppm sensor
Measuring current: approx. 0.5 mA with pulses of
approx. 60 ms length
Input accuracy (without probes):
±0.2 °C in a range of (-90 to +100) °C
±0.2 % of the measurement value in a range of (+100
to +260)
°C
The accuracy of the device with a temperature probe
connected to it is determined by the above input
accuracy and the accuracy of the probe employed.
Connection:
Two-wire
connection
with
the
possibility
of
compensation of the error caused by the cable
resistance. The probe is provided with a 3-pin M8 ELKA
3008V connector. Its connection is shown in
The recommended length of the Pt1000/E probe cable
is maximum 15 m, a length of 30 m must not be
exceeded. Shielded cables are recommended.
Summary of Contents for U0110
