IE-LGR-UxxxxM-22
35
Modem - General
_________________________________
In the configuration enter the PIN code for your SIM card, if required
(given by the settings of the SIM card used). By default, your device is
set to not require the PIN code. If the PIN code is set on the SIM card
and the required pin is set incorrectly in the device configuration,
the SIM card will be blocked when attempting to connect to the GSM
network, see
“
Display warnings
”
chapter. This option does
NOT change the PIN code settings on the SIM card, only the PIN code
required for the SIM card is entered here.
Modem
– Text message - General
____________________
In the case that the alarm condition persists for a longer time,
determine whether the warning text message should be sent on the
alarm inception only, or whether it should be repeated. The repetition
interval can be pre-set in a range of 30 minutes to 24 hours.
Specify the total daily limit for the number of SMS messages sent from
the device (i.e. the maximum number of sent SMS messages per day
for both battery and external power together) and the maximum daily
limit for the number of messages sent in battery mode (to conserve
battery capacity). Before sending a message, the daily limit value will
be ascertained. Should the limit value be reached, the respective
recipient will receive a message indicating that the daily limit
of the outgoing messages has been reached. For the day in question
no further messages will be sent to the recipient’s number. When it is
required to send the message to another recipient, only a notification
is sent about the daily message limit error. No further messages will be
sent out to this recipient’s number on this day. The daily limit will be
reset at time 00:00.
If you want alarm text messages to be sent, remember to assign
the pertinent recipients of these messages to the particular alarms.
This concerns alarms on measurement channels, system alarms,
as well as warnings about exceeding the data memory occupancy limit.
This assignment is to be performed during setting the individual alarms.
Modem
– Text message - Recipients
__________________
In this panel you can set the recipients of the SMS messages. You may
enter up to 4 recipients of text messages that the device will work with.
Each recipient is identified by their name, telephone number, additional
text and an activity flag.
If you clear this flag, text messages will not be
sent to the selected user, but all its settings will remain unchanged.
This way you can easily deactivate a user in a simple manner
and restore it later.
Summary of Contents for U0110M
