11
4.3.
LCD display
LCD
Function
Information about the time of autonomy
Displays the estimated autonomy of the UPS
H: hours, M: minutes, S: seconds
Configuration and error information
Indicates that an error or warning occurs.
Displays an error or warning code.
Output information
Displays the voltage or frequency parameters and the battery voltage.
Vac: output voltage, Hz: output frequency, Vdc: battery voltage
Load information
Indicates the load level of 0-24%, 25-49%, 50-74%, and 75-100%.
Indicates an overload condition.
Indicates a short circuit condition at the device output.
Information about the operating mode
Indicates that the UPS is connected to the 230V mains.
Indicates that the UPS is running on battery.
Indicates the UPS is in Bypass mode.
Indicates that the ECO mode is on.
Indicates that the UPS inverter is running.
Indicates that the output voltage is present.
Indicates the sound on the UPS is muted.