COVER MY SERIES – User Manual
COMEX S.A.
36
5.5.2.
Battery settings
Clicking the icon
on the settings page, it takes you to the battery parameters configuration
page. In addition to the typical settings related to the parameters of voltage and charging
current and protection against deep discharge, the UPS allows you to configure the battery rest
mode after full charge, the so-called Resting (Battery static function). The maximum duration of
the restart, where the batteries are disconnected from the charger, may be up to 30 days
depending on the configuration. In order to protect the batteries against overcharging, there is
also a function of temperature compensation of the charging voltage, which consists in limiting
the charging voltage when the battery temperature rises above 25˚C.
Figure 5.6. Battery parameters
5.5.3.
Battery tests
Clicking the icon
in the settings page, it takes you to the battery test page.
Standard test allows you to perform a short battery test, deep battery test allows you to
discharge them to a low battery voltage, time test. During the test, the UPS shows the current
status, the current drawn from the battery and the capacity used.