COVER MY SERIES – User Manual
COMEX S.A.
5
Figure 2.1. View of an exemplary power supply after removing the packaging
Tip: Remove the screws connecting the UPS housing with the wooden pallet, and screw in the
feet stabilizing the UPS, and then place the UPS at the installation point, using the exit provided
in the UPS housing. Disassembly should be done carefully so as not to damage the housing.
Please check the supplied equipment for correctness on the label located on the top cover of
the UPS. The label provides basic information about the model, power, etc.
Note: The protective materials remaining after dismantling (wood, plastic, etc.) must be
disposed of in accordance with the applicable local environmental regulations.
In order to extend the life of the device, it is necessary to provide a suitable place for its
installation, which should guarantee:
- Easy to connect to the electrical installation
- Sufficient space for handling
- Ventilation or air conditioning to ensure adequate cooling of the power supply
- Protection against corrosive gases and vapors
- Protection against excessive moisture and heat sources
- Protection against dust, dirt and other contaminants
- Adequate fire protection
- Working temperature should be in the range of 20-25ºC. At this temperature, the batteries
perform at their optimum.