COVER MY SERIES – User Manual
COMEX S.A.
28
5.
LCD panel operation
The following chapter describes the functions and capabilities of the control panel in the power
supply, including the functions of the keys and the information available on the touch LCD
screen.
5.1.
Introduction
The UPS operating panel with the LCD display is located on the UPS front panel. The LCD display
provides the user with full access to control the operating status, switch between operating
modes as well as control operating parameters and event recording. Below is presented the
main page of the display and the meaning of particular icons that may appear on it.
Figure 5.1. Touch display
Table 5.1. Description of symbols used on the power supply control panel
Symbol
Function
Power supply of the bypass line. In case of abnormal power parameters,
the icon flashes and lights up
.
Rectifier track supply. In case of abnormal power parameters, the icon
flashes and lights up
.
Battery status. If the voltage is incorrect or not, the icon flashes and lights
up
.
System output. If the voltage is incorrect or not, the icon flashes and
lights up
Back to main page.
History of events.
System parameter settings.
Warnings / Alarms
Speaker
Login
On/off