TROUBLE
S
SHOOTING
2
3
4
5
6
7
8
9
10
Fault
Cause
Solution
Light on, but
motor does not
work
The blades are blocked.
The capacitor is damaged.
The motor is damaged.
The internal wiring of motor is cut off/
disconnected. An unpleasant smell
may be produced.
Both light and
motor do not
work
Apart from the above mentioned, check the following:
Light damaged.
Replace lights.
Power cord loose.
Connect
Oil leakage
Outlet and the air ventilation entrance
are not tightly sealed.
Take down the outlet and seal with glue
Vibration
The blade, if damaged, can cause
vibrating.
The motor is not tightly fastened.
The
range
hood is not tightly fixed.
Fixed the
range
hood tightly.
Insufficient
suction
The distance between the cooker
hood and the cooker top is too large.
Readjust the distance.
Too much ventilation from open doors
or windows.
Choose a new place to install the
appliance or close some doors / windows.
The
machine
inclines
The fixing screws are not tight
enough.
Tighten the fixing screw and make it
horizontal.
The hanging screws are not tight
enough
Tighten the hanging screw and make it
horizontal.
C
all
Consumer Service
C
all
Consumer Service
C
all
Consumer Service
C
all
Consumer Service
power cord
or clean grease filters.
C
all
Consumer Service
Fasten the motor tightly or
C
all
Consumer Service.
Comfee
Comfee
Comfee
Comfee
Comfee
Comfee
12
