Setup and Operation
1. Attach the Heated Seat Cushion to a chair with elastic
straps or place it on other support.
2. Connect the adapter cable to the corresponding cable
on the cushion.
3. Plug the home adapter into an outlet or the car adapter
into your car’s power receptacle.
4. Turn on the device using the controller
(Refer to below remote controller instruction.)
5. When finished place the controller in the pouch at the
side of the cushion.
Heat on Seat:
0 : Off
I : Low
II : High
Timer Button:
Press to set the
heat time at
15, 30, or 60
minutes
Note:
default
automatic
runtime is 60
minutes
0
0
Rücken
Lenden
Bein
Back
Seat
MIN
30 60
15
Heat on Back:
0 : Off
I : Low
II : High
Power:
Press to
turn on or off
the device
3
