Comfier CF-9202, User Manual

7

Care and Cleaning Instruc�ons

TROUBLESHOOTING GUIDE

1. Do not wash the machine or immerse the product or the adapter in water.

2. Always switch off before cleaning and remove the adapter from the socket with clean, dry hands.

3. The massager should be wiped with a slightly moist cloth and dried thoroughly. Do not wipe the 

product with alcohol or harsh chemicals such as thinner or bleach.

4. Keep away from heat, fire or exposure to direct sunlight.

5. Do not apply excessive pressure or impact onto massager/massage heads. Applica�on of a direct 

force in excess of 110 lbs. may damage your massager and invalidate your warranty. Refrain from 

over usage of the device.

6. Avoid contact with sharp edges or pointed objects which might cut or puncture the cover of 

massager.

7. Folded away for storage when not in use for long �me.

8. Store the massager in a cool, dry place. 

Massage heads rota�ng at 

reduced speed. 

Massage heads only rotate in

the upper or lower region.  

Device switches off suddenly  

Jerky mo�on of massage heads / 

Vibra�ons from device 

Excessive pressure may have been applied onto the

device. Reduce the load and try again.

only ac�vate the heat func�on, press other bu�ons to

ac�vate the shiatsu func�on.

Infra-red lights are on but no

mo�on from massage heads  

Fault

Solutions

The load on the massage heads is excessive. Reduce

load and try again.  
The massage has been ac�vated for the upper or 

lower back region. Press the 'Full Back' bu�on for the 

massage to cover both regions. 
Device may have been in use for 15mins. Auto-shut-

off func�on ac�vated. Con�nue using by pressing the 

‘power’ bu�on a�er res�ng the unit for 15mins. 
Over-heat protec�on func�on ac�vated. Device is

switched off for your safety. Please rest device for 15-

30mins before restar�ng. 

Check if adapter is plugged into socket. 
Check if adapter output is connected to device

power inlet wire.  

Check if device has been used for more than 15mins. 

If so, let device rest for 15mins before con�nuing. 

Device may require longer �me to cool in warmer

environments.   

Device fail to start