User/Owner Manual M-03 WI-266rev0 WINTUR P/L Edited 19.12.2014 NRS
6 |
P a g e
DO NOT USE CHAIR UNTIL YOU HAVE FULLY READ THE INSTRUCTIONS
To adjust the seat depth
1.
Loosen the hand screws that are located underneath the seat.
2.
Adjust either the seat position or the backrest position by moving forwards or
backwards (depends on model purchased), until the desired seat depth has been
achieved.
3.
Tighten the hand screws again until they are very firm.
4.
Ensure the seat or backrest is secure before returning the chair into use.
5.
Castors - Braking
(depending on chair model you have purchased)
a.
Warning:
do not operate castor tabs by hand, or by feet without shoes
b.
To activate
Individual brakes on rear castors
i.
To engage
, press down RED brake tab at point
A
with your foot
– see
diagram below
ii.
To disengage
, press RED tab at point
B
with your foot
– see diagram
below
Castor photo has been used for illustration purposes only. May not represent the exact style on your chair
6.
Castors – Directional Lock
(depending on chair model you have purchased)
a.
Warning:
do not operate castor tabs by hand, or by feet without shoes
b.
To activate
Directional Lock on front castors
Note:
Front castors may be factory fixed in one position/direction for safe and
effective operation of your chair – therefore no tab will be present for locking
i.
To engage
, press down GREEN tab at point
A
with your foot
– see
diagram below
ii.
To disengage
, press GREEN at point
B
with your foot
– see diagram below
3. OPERATING INSTRUCTIONS – cont’d
