User/Owner Manual M-03 WI-266rev0 WINTUR P/L Edited 19.12.2014 NRS
7 |
P a g e
DO NOT USE CHAIR UNTIL YOU HAVE FULLY READ THE INSTRUCTIONS
7.
Operate Slide-out Footplate
(depending on chair model you have
purchased)
a.
Apply brakes
as described in step
No. 5
before using this function
b.
To slide out the plastic footplate
, grip the front of the footplate with hand and
slide it out until you hear and feel it drop into a retaining position.
See picture
below.
c.
To retract or return the footplate to the hidden/closed position,
using the front
of your foot, or by gripping the front of the footplate with your hand, slightly lift
the footplate to disengage the ‘locked’ position and then slide the footplate back
until it is no longer projecting beyond the front of the chair.
8.
Reclining Backrest
(For chairs models fitted with this feature)
Recliner activation/release lever is located on the right side of the chair, just under
the edge of the seat frame.
1.
Apply brakes
as described in step
No. 5
before using this function
2.
Make sure that the client/user is positioned safely, including limbs and clothing
etc.
3.
To recline the backrest, slide the release lever towards the front of the chair,
whilst applying slight pressure on the backrest of the chair. Once the desired
position is reached, let go of the release lever to hold this position.
4.
To return the backrest to the upright position, slide the release lever towards the
front of the chair and allow the backrest to recline to the desired position, and
then let go of the release lever to hold this position.
3. OPERATING INSTRUCTIONS – cont’d
