User/Owner Manual M-03 WI-266rev0 WINTUR P/L Edited 19.12.2014 NRS
9 |
P a g e
DO NOT USE CHAIR UNTIL YOU HAVE FULLY READ THE INSTRUCTIONS
10.
To fit Activity Tray
(option)
Tray locating or locking pins are positioned towards the front of the chair.
To fit the tray:
1.
Remove the plastic plugs in front of the steel armrest tube (if your chair came fitted
with these)
2.
Pull down, and ¼ turn the “Tray locking pin”
3.
Insert the Activity Tray arms into the arm tubes of the chair.
4.
Turn head of “Tray locking pin” until pin locates in correct hole in Activity Tray arm.
You may have to move the tray back and forth a little bit until you can locate the
hole position you require.
5.
Ensure “Tray locking pin”
has locked/engaged into the locating holes in the tray
arm before use.
To remove the tray:
1.
Pull down, and ¼ turn the “Tray locking pin”
2.
Remove the tray and store safely for future use.
3. OPERATING INSTRUCTIONS – cont’d
WARNING:
REMEMBER!!
In any manoeuvre, the safety of the Client and Carer is paramount. This is only a guide and
does not take the place or override your OH&S training or Client handling techniques. This
must be approved by those responsible persons in your organization before use. E&OE
