Comfortflame.US.com
900578-00_NC
11
INSTALLATION
Continued
Figure 15 - Installing Grate (Pan Material Not Shown)
Grate
Grate Steps
INSTALLING GRATE AND LOGS
1. Place grate over burner pan where two outer horizontal supports
on grate fit into two pan positioning notches in rear vertical edge
of pan.
2. Slide two rear log grate steps over two outer horizontal sup-
ports on grate as shown in Figure 15. (Not required for models
Oxford18LZN/24.)
3. Place back log on grate onto grate steps (see Figure 16).
4. Place front log(s) on grate and slide forward against front bars
on grate (see Figure 16).
NOTE:
Logs may vary from Figure 16 depending on model.
5. Place smaller top logs onto bottom logs (see Figure 17). Leave
as much open space between logs as possible to minimize flame
impingement and sooting.
Note:
Logs may chip if they are handled roughly or if hit together
while being placed.
Figure 17 - Placement of Top Logs
Figure 16 - Installing Front and Back Logs (Number and style
may vary)
Amherst Round Oak
Berkshire Oak
Oxford Oak
