REPLACING LIGHT BULBS
CAUTION: Even though the glass is safety glass it
may break if bumped, struck or dropped. Care
must be taken when handling the glass.
T
here is one (1) 40W Type B-10 bulb for the
flame generation.
1. Unplug the unit.
2. Open the door of the unit with the handle.
3. Loosen the two (2) screws at the front of the
logset inside the stove.
4. Carefully lift the
logset up far enough
to access the light
bulb. You will find one
40W Type B-10 bulb
under the logset bed.
5. Loosen and remove the burnt out bulb and
replace with new 40 watt Type B-10 bulb.
6. Return the logset bed and secure with the two
screws.
7. Plug in the unit.
MAINTENANCE OF MOTORS
The motors used on both blower fan and
flame simulator assembly are prelubricated
for the extended warranty of the motor, no
further lubrication is required. However,
periodic cleaning/vacuuming of the fan/heater
unit is recommended.
GLASS INFORMATION
1. Under no circumstances should this
product be operated with missing or broken
glass.
2. Do not strike or slam the glass.
3. Do not use abrasive cleaners to clean the
glass.
4. Replacement glass is available from the
manufacturer and replacement should be
carried out by a qualified service person.
CLEANING
To clean the unit, first turn off controls on unit
and unplug unit from power source.
To clean the glass door: remove dust with
clean dry cloth or to remove finger prints and
other marks clean glass with clean damp
cloth. Do not use abrasive cleaners or spray
liquids on glass door surfaces.
Metal and metal painted parts should be
cleaned with clean damp cloth only. Do not
use abrasive cleaners or spray liquids on this
surface.
5
WARNING: Make sure
that the power is turned
off before proceeding.
WARNING: Wait until the
unit has completely
cooled before attempting
any cleaning.
SERVICE INSTRUCTIONS
WARNING: Disconnect power
before attempting any
maintenance or cleaning to
reduce the risk of fire, electri-
cal shock or personal injury.
WARNING: Do not exceed
40 Watts for light bulb.
Use of a higher rated bulb
may result in a fire
causing property damage
and personal injury.
