11
10
SA 1 Memory
SA 2 Memory
SA 3 Memory
Method of usage
Method of usage
Other manual functions
Function
Button
Description
Rise up
button
Lie-down
button
Auto lie-
down mode
Press this button, backrest goes up slowly, and calf rest goes
down, stop when release it. If up to top, stop rising, sounds
with
di-di-di
alarming.
Press this button, backrest goes down slowly, and calf rest
goes up, stop when release it. If down to bottom, stop down,
sounds with
di-di-di
alarming.
The modes will change accordingly with each press, total
with 3 modes
3.Turn off power, stop massage
In massage process, press red button, all the massage function will stop, and you
can store the massage modes, the back rest and calf rest will restore
automatically. If up to the setting time, all the massage function will stop, but the
back rest and calf rest will not restore.
Memory function: manual controller screen will glitter with
memory
, you can
choose M1, M2 or M3 as you need to store it, and the screen will display
corresponding icons. Or press power button again, stop the machine, the
massage hands, backrest, footrest will restore, or wait for 10s, it will stop
automatically, massage hands, backrest, footrest will restore
Function
Button
Display
Memory
massage
Cut off the power of the whole machine.
Figure (Switch power off)
Diagram of the switch position of power supply
Power switch method map
When the machine under the working state, with lying and calf rest lifting, you
could not apply gravity on the calf, to prevent the massage chair does harm to
peoplebefore dumping.
Note
4.Calf rest linkage pole installation
Open the packing(figure 1), switch on, move the massage chair through manual
controller to the position as (figure 2)
figure 1
figure 2
Take off the linkage pole from the seat inside, align at the hole, insert in the pin
roll.(Figure3)
The installation finished. (Figure 4)
figure 3
figure 4
