12
13
figure 5
Method of usage
Method of usage
After the linkage pole installed, through the manual controller to restore the backrest,
(figure 5), then install the calf rest.
6.Pillow and backrest pad's dismounting and use manual
Using pillows can reduce the kneading massage intensity on shoulder
andneck,according to your needs to decide whether the pillow pad is
needed(recommend headcushions). Backrest cushion and backrest connected
byzipper (1), head cushion and backrest pad connected by thread gluing (2)
Zipper
Thread gluing
7.Floor Protection
Put the heavy massage chairs on the wood floor for a longtime may damage thefloor,
so please place a carpet or other object to avoid this damage.
Do not move the chairs with its wheels on wood floor, rough ground
or in anarrow space. Two people are required to lift the chair.During
the lifting period, the windscreen and backrest cover grooves as the
focal point(Please do not lift armrest directly)
NOTED
8.Method of movement
Make sure that all wires are far above the ground, tilt the backrest backward to acertain
degree (with the gravity center resting on the wheels), push the chair forwardor
backward with your hands and finally resume the chair to the normal position in aslow
and gentle manner.
NOTED
During movementyou must turn off the power switch firstand then
unplug the power line and hand controller connecting line
5.Calf installation
Install the rotating shaft incalf fixed axis first, noticed the hole should be aligned, so
that the R shape pin assembly (chart 1)
After calf is connected with the fixed axis aligned, then insert (chart 2)
chart 1
chart 2
Plug R pin, then moved to the other side of the calf, and the plug R pin (chart 3)
Finished (chart 4)
chart3
chart4
