44
FUNCTION INSTRUCTION (60-6212)
While seated, lean forward, lifting your body weight from
the seat. Reach underneath the right side of chair and
locate the handle. Lift the handle up slowly to allow the
chair to rise to the desired height. To lower seat height, lift
the handle slowly while seated.
TO ADJUST SEAT HEIGHT
Reach under the front center of the chair seat and grasp the
round black tension knob. To loosen the tilt mechanism,
turn the knob clockwise. This lessens the effort required to
recline the back cushion of the chair. To tighten the tension
knob, rotate counter-clockwise. Rotate the knob until the
desired resistance is reached.
TO ADJUST TILT TENSION
While seated, reach underneath the right side of chair and
locate the handle. Slide the handle all the way out towards
the right (away from the seat). When the handle is in this
position, leaning back will cause the chair to tilt backwards.
To lock the chair in the upright (vertical) position, sit in the
chair, and push the handle in to the left (towards center of
seat).
TO OPERATE TILT LOCKOUT
360 DEGREE SWIVEL
Right
Handle
Round tension
knob
Right handle:
* Pull outward
to allow tilting
* Push inward
to lock out
the tilt
360 degree seat swivel
