4
FUNCTION INSTRUCTION (60-6212)
Your new office chair features 3 vibration massage motors
to soothe your upper and lower back.
Connect the controller cord to the back cushion. Then
connect the included power adapter to the chair, and plug
into a standard power outlet.
TO CONNECT CONTROLLER
TO USE MASSAGE CONTROL
Do not use the massage motors for more than 30 minutes
at a time. Always unplug the power adapter when massage
is not in use.
If you have any health concerns about using the massage
feature, consult your physician.
Do not use the massage motors when wet.
To clean the upholstery, unplug the adapter, and spot clean
with leather or vinyl cleaner.
Use the chair to seat only one person at a time.
If the massage does not work, make sure all connections
are correct. You should also try a different power outlet.
If the massage still does not work, visit our website at
www.comfortproducts.net/support and request a new
controller (# 61-CNTRL6212HZ) and power adapter (#
61-ADAPT6212).
SAFETY AND MAINTENANCE
POWER
ON/OFF
ON/OFF
ON/OFF
UPPER BACK
LOWER BACK
HIGH
LOW
MASSAGE
INTENSITY
UPPER BACK -
turn switch to
“ON” or “OFF”
to activate upper
back massage
(first turn POWER
switch to “ON”)
You can select either “upper back”, “lower back” massage,
or both. To adjust the massage intensity, simply use the
slider on the controller to select your desired level.
POWER
ON/OFF
ON/OFF
ON/OFF
UPPER BACK
LOWER BACK
HIGH
LOW
MASSAGE
INTENSITY
LOWER BACK -
turn switch to
“ON” or “OFF”
to activate lower
back massage
(first turn POWER
switch to “ON”)
MASSAGE
INTENSITY -
Slide the switch
up (HIGH) or
down (LOW) to
select your desired
intensity level
POWER -
turn switch to “ON”
or “OFF” before
selecting UPPER
or LOWER back
