Comfort Products RELAXZEN 60-701011M, Assembly Instructions Manual

4

TO ENABLE MASSAGE FUNCTION

TO USE MASSAGE CONTROL

Do  not  use  the  massage  motors  for  more  than  60  minutes 

at  a  time.  Always  unplug  the  power  adapter  when  massage 

is not in use.

If  you  have  any  health  concerns  about  using  the  massage 

feature, consult your physician.

Do not use the massage motors when wet.

To  clean  the  upholstery,  unplug  the  adapter,  and  spot  clean 

with leather or vinyl cleaner.

Use the chair to seat only one person at a time.

It is normal for the massage motors to be somewhat loud,

Input: 12V-1A

Output: 5A-2A

especially on high intensity.

The heater produces only a mild heat. It is not designed to get 

very hot.

If  the  massage  does  not  work,  make  sure  all  connections 

SAFETY AND MAINTENANCE

OTHER INFORMATION

USB SPECIFICATIONS

FUNCTION INSTRUCTIONS 

If  the  massage  still  does  not  work,  visit  our  website  at 

www.comfortproducts.net/support  and  request  a  new 

controller (61-7000MCTR) and power adapter (61-7010MAD).

This massage chair is designed with 8 vibration motors and

soothing heat function at the lumbar area.

To engage the massage press the POWER button. Change the 

mode, zone, intensity, and heat as desired.

You can also switch to the auto setting by pressing the AUTO

button. This will cycle through the modes at one minute each.

For the manual setting, press any one of the zone buttons. You 

may now manually select which zones to engage up to all 4 at 

once. (NOTE: pressing the MODE button takes you back out of the 

manual setting)  

Five levels

of INTENSITY

Turn POWER on 

before adjusting

settings

Press HEAT to

activate heat   

in lumbar area

Nine massage 

MODES

Four massage 

ZONES

Set TIMER at 

10, 20, or 30

minutes.

This screen

shows the time 

remaining. 

TIMER

MODE

INTENSITY

1

2

3

4

5

1

2

3

4

5

6

7

8

9

HEAT

POWER

TIMER

AUTO

MODE

INTENSITY

RELA ZEN

BACK

LEG

THIGH

LUMBAR 

(6)

(5)

Splitter. Connect the Splitter to the two remaining BLACK plugs. Connect the RED plugs together and then the

Black Controller Plug

Black Power

Splitter 

(7)

Adapter Plug

Red Plugs

White Plugs

TIMER

MODE

INTENSITY

1

2

3

4

5

1

2

3

4

5

6

7

8

9

HEAT

POWER

TIMER

AUTO

MODE

INTENSITY

RELA ZEN

BACK

LEG

THIGH

LUMBAR 

WHITE plugs together. Plug into a power source.