3
3
CZ700T
www.comfortzone-us.com
Usage:
Fan Operation:
Always operate the fan in the upright position
following all instructions and recommendations listed in this
manual.
Fan Location:
Place the fan in the area of the room that will
provide proper fan cooling.
Fan Connection:
Plug fan directly into 120 volt A.C., 60 Hz
wall outlet. Be sure plug fits tightly in outlet. A loose connection
may cause overheating and damage to the plug or fan.
Note:
To prevent overloading a circuit, do not plug the fan into a
circuit that is servicing other electrical needs.
Assembly Instructions:
Simple assembly is required to use
this fan on a table or floor. Snap legs to fan cradle (Fig. 1). Short
side of base leg should face the front of the fan, long side should
face the back of the fan (the side with the Rotary Speed Dial), see
Fig. 2.
Turning Fan On/Off:
To start the fan, turn rotary ON/OFF dial
on Control Panel to desired speed setting.
0 - Off
1 - Low
2 - Medium
3 - High
Rotate ON/OFF dial to 0 - OFF to discontinue
use. Unplug fan when not in use.
Fan Tilt:
This fan can tilt 180° to direct airflow for maximum
comfort. Grasp the fan body and tilt the fan to desired angle.
Ratchet action will keep the fan at the selected angle. Do not
force fan around cradle past 180°.
Fig 1
Control Panel
Fig 2
Long Side
Faces Rear
of Fan
