INSTALLATION & ASSEMBLY: BASIN
2
7
8
10
11
9
12
13
5
6
3
4
1
17
16
15
14
BENCH FIXING DETAIL
1. Position Bench as required.
2. Bench must be secured to the floor, or wall.
(Fasteners not provided)
3. Seal base – seal the base of the bench inside and outside
with silicone.
BASIN ASSEMBLY
4. Install Flick Mixer using the O-ring, plastic and metal
washers & Long Nut, and Showerhead using the
Showerhose Basin Collar, O-ring, Foam Washer and
Plastic Nut as indicated.
5. Place Flick Mixer and Showerhead Hoses through the
holes in the Vinyl Strap.
6. Connect Flexible Waste Pipe to Plug and Waste which is
already installed making use of end with Flat Seal and
fitted flange.
BENCH KIT ASSEMBLY
7. Connect hot and cold (½” connection) water braided
hoses to respective supplies.
8. Connect Flexible Waste Pipe (supplied) to P Trap (not
supplied) making use of Seal and Flange.
9. Connect Basin Spring which is already connected to the
tilt and slide plate to the hole in the Bench Kit Frame at
the front left corner.
10. Place both ends of Vinyl Cover into the slots provided on
front and back of Bench Kit Frame.
1
Flick Mixer
2
Showerhead
3
Showerhose Basin Collar
4
Comfortneck
5
Foam Washer
6
Plastic Nut
7
Showerhead hose
8
Vinyl Strap
9
Flat seal
10
Flexible Waste Pipe
11
Fitted flange
12
Flange
13
Seal
14
Long nut
15
Plastic & Metal Washers
16
O-ring
17
O-ring
18
Basin spring
19
Bench Kit Frame
Comfortel Furniture Pty Ltd ABN 60 300 719 042
www.comfortel.com.au
Victoria (Head Office)
39-41 Nelson Street
Moorabbin VIC 3189
T 03 9553 5504
F 03 9553 5516
New Zealand
Comfortel Furniture Ltd
128a Hugo Johnston Drive
Penrose Auckland NZ
T 09 525 3357
F 09 525 3355
New South Wales
64 Hotham Parade
Artarmon NSW 2064
Ph: 02 9966 5900
Fax: 02 9966 5955
Queensland
18/6 Maunder Street
Slacks Creek QLD 4127
T 07 3209 1444
F 07 3209 1666
Western Australia
2/25 Catherine Street
Bentley WA 6102
T 08 9258 4446
F 08 9258 6601
South Australia
2A West Thebarton Road
Thebarton SA 5031
T 08 8443 3703
F 08 8443 3702
19
18
ALL PLUMBING MUST BE COMPLETED
BY A LICENSED PLUMBER
IMPORTANT
BASIN ASSEMBLY
