www.comfortel.com.au
6
POSITIONING
CONNECTION
1. Connect waste pipe (Installed) to 32/40mm waste outlet.
2. Connect hot and cold (½”connection) to respective hot
and cold supplies.
ELECTRICAL REqUIREMENTS
2 x 10 amp GPO required
MASSAGE: 240V, 50/60Hz, 1.0A
PUMP: INPUT 240V, 50/60Hz 0.25A
C A U T I O N
EXCESS TWISTING/MOVEMENT OF THE WASTE PIPE CAN CAUSE
LEAkING AT THE CONNECTION WITH THE PLUG & WASTE.
POSITIONING
DIAGRAM A
DIAGRAM B
• Allow 470mm of space behind your Spa to provide room for recline of back rest.
PLUMBING AND WASTE
Follow diagram above for plumbing specifications. All plumbing
must be installed by a licensed plumber in accordance with
local regulations.
REAR DRAIN
Exit water from rear. If water can not drain by gravity in compliance
of plumbing regulations, an extraction pump is required.
Cinderalla Spa Side View
Cinderalla Spa Above View
01
01
02
03
04
1400mm
1400mm
750mm
470mm
470mm
HOT
COLD
850mm
W
ALL
1/2” male hot & cold inlets
Mixer tap
32/40mm waste pipe
Drain
Whirlpool pump
01
02
03
04
05
ø75mm
P TRAP
01
03
04
02
C A U T I O N
NEVER USE ANY OF THE PLUMBING
FITTINGS (TAPS, DIVERTER ETC) OR
THE FOOTREST TO LIFT THE PEDICURE SPA.
WALL
05
