22
4. Place the solar heating plate in the proper position and adjust the length of the aluminium leg.
Note: Hold the end of the small aluminium tube with your hand, turn it counter clockwise, then pull the
aluminium tube out to the appropriate length, turn clockwise, and lock the aluminium tube.
5. Turn off the power to the swimming pool filtration system, plug the back end of the pool with a screw
plug, and close the system valve to ensure that no water flows out when disconnecting the hose from
the back end of the pool.
6. Remove the original hose from the backflow of the swimming pool, connect it to the water inlet end of
the solar heating panel, put on the stainless steel clamp and tighten it.
Note: the water inlet and outlet ends of the solar heating panel are interchangeable. Users can make their own
choices according to the pool site reality.
Close the backflow end of the pool with plug
Close the valve of the filtration system
Disconnect the hose
Inlet end
