background image

EN

 

15 

 

1.   General information 

This manual provides information relating to the installation, utilization, and maintenance of our filtration 
system. We recommend that you read this manual in its entirety and keep it for future reference. 
 
The pump included with the filtration system is a horizontal, self-priming centrifugal pump. For the pump to 
function correctly, the water temperature must not exceed 35

/95

. The materials used in the pump have 

undergone stringent hydraulic testing and electrical inspections. The filter tank included in the filtration system 
consists of high-grade polypropylene (PP). It is manufactured as a single unit and is corrosion resistant and 
resistant to commercially available swimming pool chemicals. (Prerequisite: Compliance with the standard 
recommended specifications for the pH- and chlorine value). It is equipped with a tank drainage system. The 
filter tank comes ready to attach with an approved filter pump with hair and lint basket, and a plastic base for 
ready on- site mounting. 
 
Read this manual carefully before installation. The filtration system and pump must be installed in accordance 
with all federal and local codes and standards in effect for the area of installation. We decline all responsibility 
for the consequences of failure to comply with the installation instructions. We recommend that you comply 
with the power source instructions to avoid overloading the pump motor and/or electric shock. Your pool filter 
system has been engineered and manufactured to our highest standard for dependability, ease of operation 
and safety. With proper care, it will give you years of durable, trouble-free performance.  
 
Filter material is not included.   
 

1.1.  Safety notes 

Your filter pump was constructed and tested and left the manufacturing plant in technically operational 
condition. To maintain this condition and ensure safe operation, the user should observe the notes and product 
information contained in this technical manual. If there is any indication that safe operation is no longer 
possible, the device is to be disconnected from the power supply and secured against accidental use.

 

This is the case when: 

 

  The device has visible damage.  

  The device no longer appears functional. 

  After long periods of storage in poor conditions. 

 

1.2. 

Technical data and specifications 

The recommended filter run time is twice a day for 4 to 5 hours with floor vacuum cleaning as needed. 

 

The major components of your system are: 

  Filter pump 

  Filter tank 

  Tank lid 

  Lid V-band with bolt and nut 

  Base plate 

  Hose with fittings 

Summary of Contents for FuzzyClean 7000
























Reviews: