ComfortSystem
– our experience is your guarantee
Quick-Up
1. Instructions for use
The Quick-Up aid must NOT be used outside the bed’s long side!
1.1 Placing the Quick-Up aid in
user position
• When the aid is to be used, it is to
be placed in the attachment so that
it points slightly diagonally towards
the bed’s middle line. The small
stop on the aid’s tube has to be
located in the attachment’s deeper
notch.
Check that the Quick-Up
aid is in the right position by trying
to turn it to the sides.
1.2 Length adjustment
• The aid can be adjusted to the
correct length by loosening the
lever as shown in
figure 2
and
pulling the handle out to the
desired length. NOTE! An inbuilt
stop means it is not possible to pull
the handle out completely.
Figure 1
!
!
