7. Controller - Auto Folding
26
7.4 Pairing the remote with the chair controller
1) If chair is charging, unplug the charging cable from the chair
2) Lay the chair flat with wheels on the ground
3) Power on the chair controller then power on the remote (hold the
power button for 3 seconds till blinking red)
4) On the chair controller, press and hold the speed decrease button
till the led speed indicator shows a single amber light in the center of
the screen
5) Release the speed decrease button and press the horn
6) On the remote control, press and hold the speed decrease button
till the chair controller turns off
7) Power off the remote
8) Power on both the remote and chair controller – the remote is
paired
7.5 How to open and close your chair With the remote
Open the chair
1) If chair is charging, unplug the charging cable from the chair
2) Lay the chair flat with wheels on the ground
3) Power on the remote (hold the power button for 3 seconds till
blinking red)
4) Press the autofold button and release (button turns green)
5) Hold the speed increase / chair open button till chair opens
6) Press the autofold button again (green light goes out) to drive the
chair
Close the chair
1) Press the autofold button and release (button turns green)
2) Hold the speed decrease / chair close button till chair closes
3) Power off the chair and remote by pressing both power buttons
Summary of Contents for MAJECTIC IQ-7000
Page 1: ...User Manual Warranty IQ 7000...
Page 32: ...www ComfyGoMobility com...
