Comfy Go Mobility
Email: info@comfygomobility.com,
Tel:+1 844 755 5055
20
Diagnostics
Your controller as an indicator light that, during normal operation, is a steady GREEN. This light also
functions as a diagnostic tool by flashing in patterns that indicate problems. It is important to pay attention
to these diagnostics in case the power wheelchair must be put out of use for safety reasons until
maintenance can be performed.
If the indicator light indicates a fault, turn off the power and then turn on power again. If the fault is not
released after turning on power again, the indicator repeats this error message. Please refer to the fault
information diagnosis table to help you find possible problems and corresponding solutions.
If the above method still does not help you troubleshoot, please contact your dealer. When
communicating with the dealer, provide the specific problems in details as much as possible.
No. 1 red light flash: indicates the pressure of battery is not full.
No. 2 red light flash: indicates no signal of joystick.
No.3 red light flash: indicates the wheelchair is charging.
No. 4 red light flash: indicates moving the joystick when
turning on power. Or do not connect the motor wires.
No. 5 red light flash: indicates the brake solenoid is not
connected or damaged.