3.1 Wheelchair Adjustments
Unfolding Your Wheelchair
Connect the wiring harness plug of the battery with the wiring harness
socket from the frame (Picture 3).
Unscrew the bolts and gaskets from the controller stem, then put on
the controller and mat into the plastic gaskets, put on the bolt, and
tighten by a screwdriver (Picture 4). Then fixed the wire harness on
the frame by plastic cable ties (Picture 5).
3. Usage and Operation
10
Picture 1
Take out your wheelchair from the packing box
and put it on the ground. Push the chair frame
apart to left and right, and press two tubes on
both sides of the seat base down into the grooves
on both sides of the chair-frame. (Picture 1).
Picture 2
Upward the handle, and lock the folding device.
(Picture 2).
Before use, please make sure that
the lock is well secured. Otherwise it will
cause fold danger when riding.
Picture 4
Picture 3
Picture 5
Summary of Contents for Go 6011
Page 1: ...User Manual Warranty 6011...
Page 26: ...www ComfyGoMobility com...