ComfyGo Mobility Go 6011, User'S Manual & Warranty Card

4.1 Charger Requirements

The charger is used to charge the battery. When the electric wheel-

chair is charging, do not attempt to use the wheelchair. Wheelchair 

must be disconnected from the charger before using.

Charger Technical Data

- Input voltage: AC 220V (110V) ±10%   

- Output voltage: 24V/DC    

- Output current: 2A/4A

4.2 Charger Use and Care

IMPORTANT:

- Do not stop charging until charge process is finished. Repeated use 

of a battery that is not fully charged will shorten the battery life. The 

battery should be fully charged before use.

- When battery is fully charged, the power indicator will turn to green. 

- Do not interrupt or stop the charging process until the battery is fully 

charged.

- When charging is complete, turn off the power supply by unplugging 

the charger. Failure to unplug the unit after a full charge will cause the 

battery to slowly discharge. DO NOT charge more than 24 hours. 

Over charging the battery is dangerous.

- Users should follow the following rules to avoid charging dangers:

If the electric wheelchair does not include the charger, please use a 

national standard charger with the output voltage of 24V/DC 4A.

It should be well ventilated when charging. Do not expose the wheel-

chair to sunlight and humid environment.

- The charging environment temperature range is from 10°C to 50°C 

(50°F to 122°F). If the unit is outside of this environment temperature 

range, the battery may become unstable and may not function as in-

tended and the battery might be damaged.

- Fan noise from the charger is normal. The fan cools the charging 

unit.

- Prevent liquid from getting into the charging unit during charging. 

And do not place the charger near flammable items, such as: fuel, 

flammable liquids, or flammable materials such as the seat cushion or 

footrest.

4. Battery and Charger

14