Usage of Charger
To charge the battery, connect the charger into the Wheelchair’s con-
trol socket then connect the charger to a power supply.
Follow these steps to complete the charging process:
Step 1:
Make sure the electric wheelchair is powered off.
Step 2:
Make sure the controller socket is not blocked.
Step 3:
Make sure the battery and controller unit are connected.
Step 4:
Connect the charger’s output plug to the socket below the
controller.
Step 5:
Connect the charger’s main plug to the power supply. Once
connected, you will see a red light. This means that charging has
begun. An empty battery will be fully charged in 8 to 10 hours. DO
NOT charge the battery for more than 24 hours.
Step 6:
To keep the battery life from being shortened, please charge
the battery at least twice per month if the wheelchair is not in use.
4. Battery and Charger
15
Summary of Contents for Go 6011
Page 1: ...User Manual Warranty 6011...
Page 26: ...www ComfyGoMobility com...
