ComfyGo Mobility Go 6011, User'S Manual & Warranty Card

7.5 Wheelchair Malfunction and Checking

If a malfunction happen while the wheelchair is in use, turn off the 

power before checking.

Symptom:

 complete loss of power, and all the LED lights on the con-

troller panel are off.

Check Step:

Step 1: Check if the controller’s plug is loose.

Step 2: Check if the connection of controller’s plug and battery box is 

loose. Please reinsert the plug connector (firmly hold the plug end 

connector when pulling out the plug, DO NOT pull the plug by the wire 

as to avoid unnecessary damage to the wire). If the wheelchair is still 

not able to power up, or if users has any question, please connect 

with your dealer.

          The controller has a diagnosing system to monitor the         

          controller and motor. Any malfunction of these parts is         

          indicated by the controller. For more details please kindly      

          refer to chapter of audio signal indication.

7.6 Maintenance Checking

The following is a maintenance checklist. The electric wheelchair 

should be checked according to our suggestion. During general use of 

the wheelchair, some of the self checking is done automatically. For 

your knowledge, we have listed the self-checking items in A area.

Area A: 

Before each use, check if following parts are functioning correctly: 

1. Backrest 

2. Armrest 

3. Controller position 

4. Footrest 

5. Battery power 

6. Clutch/adjusting lever for conversion between manual mode and electric mode

Area B:

 Check the following parts monthly, to avoid loss of parts or excessive 

wear. 

1. Screws 

2. Brakes 

3. Clutch/adjusting lever for conversion between manual mode and electric mode 

4. Tire tread depth. 

5. Controller and charger connectors. 

7. Maintenance Areas

22