User Manual for RGBHV/Stereo-Audio Matrix COMM-TEC MTX Series
COMM-TEC GMBH
www.comm-tec.de
7 of 10
6. Press the button “END” to finish the command.
Display feedback on LCD: “.”
7. Press the button “ENTER” to perform this
command.
Display feedback on LCD: “Switch OK”
Example 2: To inquire the status on the output channel No.4
Operation: Press buttons in this order “4”, “STATUS”
Feedback on LCD-Display: The video input #3 and the audio input #2 are switched to the output #4.
More switch commands:
„
ALL“ + „1“:
Routes inputs to outputs with the same number: 1 to 1, 2 to 2,....
„
1“ + „ALL“:
Routes input #1 to all outputs, <2> <ALL>: Routes Input #2 to all outputs, and so on.
„ALL“ + „2“: Disconnects all routed crosspoints.
„SAVE“ + „0“ to „9“:
Saves present configuration as preset under selected number.
„
RECALL“ + „0“ to „9“:
Recalls saved preset with the selected number.
4.2 Remote Controller Operation
The MTX series matrix switcher can be controlled with the supplied infrared remote controller.
Button functions are the same as with front panel. Only the buttons „Through“ and „Close“ have a
functions when pressed directly after „ALL“.
The keys <PROGRAM>, <UNDO>, <DEMO> are without function. Attention <LOCK> button: before
usage set password with control software. Otherwise front panel can be only unlocked with this
software.
For details please refer to
Front Panel Operation
.
0
END
/
ENTER
RECALL
Input Command
：
1B3 4.
，
1B3,4.
Switch OK
3
4
2
RECALL
STATUS
CANCEL
VIDEO: 3 4
AUDIO: 2 4
Switch OK!
AV: 01 -> 004
