4K Switcher with Soft Codec & Matrix Outputs
21
6.3.2 Signal Switching
Command
Function
Command & Feedback
Example
#SET_AV(param1)
(param2)
Set Rx channel
param1 = HDMI, HDBT. This param
could be omitted.
HDMI - HDMI OUTPUT
HDBT - HDBT OUTPUT
(If this param is omitted,
which means input source to both HDMI
and HDBT outputs.)
param2 = H1 , H2, DP, C, RXH
H1 - HDMI1 INPUT
H2 - HDMI2 INPUT
DP - DP INPUT
C - TYPEC INPUT
RXH - RXHDMI INPUT
#SET_AV H1
#SET_AV H2
#SET_AV DP
#SET_AV C
#SET_AV RXH
#SET_AV HDBT H1
#SET_AV HDBT H2
#SET_AV HDBT DP
#SET_AV HDBT C
#SET_AV HDBT RXH
#SET_AV HDMI H1
#SET_AV HDMI H2
#SET_AV HDMI DP
#SET_AV HDMI C
@HDBT_AV H1
@HDBT_AV H2
@HDBT_AV DP
@HDBT_AV C
@HDBT_AV RXH
@HDMI_AV H1
@HDMI_AV H2
@HDMI_AV DP
@HDMI_AV C
#GET_AV (param1)
Get current Rx channel
param1 = HDMI, HDBT. This param
could be omitted.
HDMI - HDMI OUTPUT
HDBT - HDBT OUTPUT
(If this param is omitted,
which means getting the output ports of
both HDMI and HDBT.)
#GET_AV
#GET_AV HDBT
#GET_AV HDMI
@HDBT_AV H1
@HDBT_AV H2
@HDBT_AV DP
@HDBT_AV C
@HDBT_AV RXH
@HDMI_AV H1
@HDMI_AV H2
@HDMI_AV DP
@HDMI_AV C
#SET_AUTO_SWITCH
(param1) (param2)
Set to AUTO/MANUAL switch mode
param1 = HDMI, HDBT.
This param could be omitted.
#SET_AUTO_SWITCH 1
#SET_AUTO_SWITCH 0
#SET_AUTO_SWITCH HDMI
